Module, DP and CP series Shaper Cutters are supplied by DIC Various forms of Shaper cutters such as non-topping, semi-topping, topping, finishing, roughing, pre-shaving or pre-grinding, with or without protuberance, etc., are manufactured Both spur type and helical type Gear Shaping cutters are made Designing and Production of relief ground Shaping cutters for involute splines, worms (cutter to be used in hobbing machine by kinematics inversion process) and relief machined cutters for sprocket, parallel sided splines etc., are done at DIC.
The range of Shaping cutters available at DIC includes different varieties of disc type, hub type and shank type. Tandem Shaping cutters are also supplied Shaper cutter material is generally AISI M35 (6-5-2+5%Co).
On special request, Shapers made in powder material (ASP 2030, ASP 2052) and TiN, Ti AIN, Alcrona Pro coated Shapers are supplied Normally, accuracy classes are as per DIN 1829 Standard AA,A. However Shaper cutters are made to suit other accuracy Standards also.
|PARAMETER||LIMITATION / RANGE|
|MODULE||0.75 TO 12|
|PCD||12.7 TO 200mm|
|BORE DIAMETER||12.7, 16, 19.05, 22, 25.4, 31.75, 32, 44.45, 58.7375, 63.5, 70, 88.9, 101.6MM|
|Helix angle||Up to 40 deg RH & LH|
|Shank Type||OAL upto 160mm|